Paint Protection, Ceramic Coating & Tint in Keller
2CG Automotive Styling serves Keller from a by-appointment studio in Grapevine. Keller drivers seeking paint protection film (PPF), ceramic coating, ceramic window tint, or custom vinyl wraps reach us in about 15–25 minutes via SH 114 and local connectors—serving Keller from our Grapevine studio, by appointment only. Close enough for easy drop-off, quiet enough for careful installs.
SUVs, trucks, and performance cars in Keller see the same UV and highway wear. Coverage is sized to the vehicle and how it is driven, not a one-size retail package.
Services for Keller drivers
Paint Protection Film (PPF)
Transparent film for chips and UV on Keller–DFW corridor driving, from essential front-end coverage to full-body protection. We exclusively use STEK Films for durability, clarity, and premium finishes, including gloss, satin, and specialty options. Coverage can start with an essential front-end package and scale to gold-level impact zones or full-vehicle film, depending on how the car is driven. Film coverage carries a 10-year warranty as stated on our site.
Ceramic Coating
Ceramic coating adds UV protection and a hydrophobic surface that helps water and dirt release more easily on paint, vinyl wrap, or PPF. Every ceramic install at 2CG includes a 1-step polish, so the surface is prepared before the coating goes down. For Keller owners, that usually means easier wash-downs after highway miles and stronger defense against North Texas sun on panels that see open parking.
Ceramic Window Tint
Ceramic window tint is built for Texas heat, privacy, and UV control—with clear visibility and signal-friendly construction. Films on our Services page block up to 98% of infrared light and 99% of UV rays, with a limited lifetime warranty—useful for summer drives and parked vehicles around Keller, without relying on metallic films that can interfere with signals.
Vinyl Wraps
Full color change, accents, chrome deletes, and commercial graphics—without painting over factory finish. Film options include brands shown on our site—3M, Avery Dennison, and TeckWrap. Partial work such as roof wraps and chrome deletes keeps factory paint intact underneath.
Why Keller drivers choose 2CG
Close without the rush. About 15–25 minutes from Keller to our Grapevine studio via SH 114—appointment only.
Daily-driver and weekend cars alike. Protection scoped for SUVs, trucks, and performance vehicles that share the same sun and highway wear.
Coordinated services. PPF, tint, and ceramic planned as one package when a build needs more than film alone.
Simple booking. Call, BOOK NOW, or Contact—then a confirmed drop-off window.
What to expect at your appointment
Consultation. Tell us the year, make, and model, plus the services you want—PPF, ceramic, tint, wraps, or a combination. We use that to recommend coverage, finish, and an install timeline. Call (214) 970-1891, use BOOK NOW for Square Appointments, or send a message on the Contact page. Timing is confirmed before you drop off.
Prep and paint correction. Before coating or film, surfaces need to be clean and ready. All ceramic installations include a 1-step polish. For drop-off, remove personal items, wash the exterior a few days prior, and vacuum the interior so technicians have clear access.
Install. Paint protection film, ceramic coating, ceramic window tint, and vinyl wraps are installed in a private studio environment with time reserved for your vehicle. Edge work and multi-panel film are scheduled as appointment blocks, not walk-in slots.
Cure and aftercare. After film or coating, we review care basics so the finish can settle properly. Maintenance tips for film, tint, and coatings are also covered in our Learn guides when you want a longer checklist.
Pickup. Visits are by appointment only—serving Keller from our Grapevine studio, by appointment only. We confirm your window before you arrive so pickup stays as orderly as drop-off.
Daily drivers that share sun and highway wear
Keller daily drivers—SUVs, trucks, and performance cars alike—share SH 114 sun and highway wear. Weekend cars see the same UV when they sit. Protection should match the vehicle and the route, not a generic retail menu.
We quote film by coverage, ceramic as a finish layer over paint or PPF, and ceramic tint for cabin comfort. Multi-service Keller builds are scheduled as appointment blocks so edge work and polish are not rushed.
Pairing services
PPF, ceramic coating, and ceramic tint solve different problems on the same car. Film absorbs chips and abrasion. Ceramic improves UV resistance and wash behavior on paint, wrap, or PPF. Tint reduces infrared heat and UV through the glass, with signal-friendly ceramic film and a limited lifetime warranty as stated on our Services page.
For Keller drivers, we often plan those layers together so install order and cure windows make sense. Wraps can replace or complement paint when color or branding is the goal. Coverage and finish recommendations are made after we know the year, make, and model—call (214) 970-1891 for a quote.
FAQ — Keller
How long is the drive from Keller to 2CG?
Most Keller clients reach our Grapevine studio in about 15–25 minutes via SH 114 and nearby routes, traffic depending. No walk-ins—appointments only.
Why protect a vehicle in Keller’s climate?
North Texas sun, heat, and highway debris wear unprotected paint and interiors. PPF, ceramic coating, and ceramic tint reduce that exposure day to day.
How are quotes set?
By vehicle and coverage. Call (214) 970-1891 with your year, make, and model.
How long does a PPF or tint visit take?
It depends on the package. We confirm timing during consultation.
What care follows ceramic coating?
Use the aftercare guidance from pickup and avoid aggressive early washes.
How do Keller clients book?
Call (214) 970-1891, use BOOK NOW for Square Appointments, or use the Contact page. We confirm your time before you arrive.
Keller drivers: call (214) 970-1891 or book a consultation for PPF, ceramic, tint, or wraps.
Photo: Larry D. Moore / Wikimedia Commons / CC BY 4.0